1) مطالعه ى تجربى و عددى چقرمگى شکست در مورد I بارگذارى براى مواد کامپوزيت مسعود شيخ انصارى دانشگاه تهران 1393/06/30

Transcription

1 نام و نام خانوادگى مرتبه علمى رهام رفيعى دانشيار ا درس محل کار --- تلفن --- فکس پست الکترونيک ا درس وب سايت تحصيلات راهنمايى پايان نامه 1) کارشناسى, 1379, مهندسى مکانيک, دانشگاه علم و صنعت ايران 2) کارشناسى ارشد, 1382, مهندسى هوافضا, دانشگاه علم و صنعت ايران 3) دکترى, 1388, مهندسى مکانيک, دانشگاه علم و صنعت ايران 1) مطالعه ى تجربى و عددى چقرمگى شکست در مورد I بارگذارى براى مواد کامپوزيت مسعود شيخ انصارى دانشگاه تهران 1393/06/30 2) بررسى رفتار ا يروالاستيک پره کامپوزيتى توربين باد محسن مرادى دانشگاه تهران 1393/06/31 3) مدلسازى فاز واسط بين نانولوله کربنى و رزين با شبيه سازى اتمى محمد مهدوى دانشگاه تهران 1393/12/16 4) پيش بينى خواص مکانيکى الياف پرزدار امين قربان حسينى دانشگاه تهران 1394/11/28 عضويت در مجامع ملى و بين المللى فعاليتهاى اجرايى فصلى از کتاب 1) انجمن علمى کامپوزيت ايران عضو ملى 1392/02/01 2) انجمن متخصصان صنعت کامپوزيت ايران عضو ملى 1394/04/01 1) رييس دفتر ارتباط با صنعت 1393/03/03 ايران تهران 2) دبير اولين کنفرانس بين المللى لوله و مخازن کامپوزيت 1393/11/ /11/08 ايران تهران 3) مسوول دفتر ارتباط با صنعت 1396/08/ /08/14 ايران تهران 4) مسوول دفتر ارتباط با صنعت 1394/09/14 ايران تهران 5) دبير کنفرانس کاربرد کامپوزيت در صنايع ايران 1395/11/ /11/06 ايران تهران 6) عضو کميته ارزيابى کيفيت دانشکده 1396/08/17 ايران تهران 7) سرپرست ا زمايشگاه تحقيقاتى کامپوزيت 1396/10/18 ايران تهران 8) نماينده هيات اجرايى جذب 1396/11/02 ايران تهران 9) سرپرست ا زمايشگاه تحقيقاتى کامپوزيت 1399/10/ /10/04 IRAN تهران 1) Rafiee, Roham. "Recent advances in composite materias for wind turbine blades." : World Academic Publishing, ) Rafiee, Roham, and Reza Pourazizi. "Chemical functionalization of carbon nanomaterials, chemistry and applications." : CRC press, Taylor & Francis group, ) Rafiee, Roham, and Mohammad Mahdavi. "Research and Innovation in Carbon Nanotube-Based Composites." : World academic publishing, ) Rafiee, Roham, Amin Ghorbanhosseini, Reza Pourazizi, and Mohammad Mahdavi. "Advances in Materials Science Research (Volume 27)." New York: Nova Science Publishers (New York), ۱

2 کتاب هاى غير از تاليف و ترجمه 1) Rafiee, Roham. "Carbon Nanotube-Reinforced Polymers: From Nano to Macro." : Elsevier, ) Rafiee, Roham. "Carbon Nanotube Reinforced Polymers: From Nanoscale to Macroscale." : Elsevier, ) رفيعى رهام. "مجوعه مقالات اولين کنفرانس بين المللى لوله و مخازن کامپوزيت." تهران: دبيرخانه کنفرانس ) رفيعى رهام. "چکيده مقالات کنفرانس کاربرد کامپوزيت در صنايع ايران." تهران: دانشکده علوم و فنون نوين ) Rafiee, Roham, and Meghdad Heidarhaeib. "Investigation of chirality and diameter effects on the Youngs modulus of carbon nanotubes using non - linear potentials." Composite Structures 94, no. 8 (2012): مقالات چاپ شده در نشريات بين المللى 2) Rafiee, Roham, Abdolhossein Fereydun, and Meghdad Heiydar Haei. "Influence of non - bonded interphase on crack driving force in carbon nanotube reinforced polymer." Computational Materials Science 56, no. --- (2012): ) Rafiee, Roham, and Reza Maleki Moghadam. "Simulation of Impact and Post - impact Behavior of Carbon Nanotube Reinforced Polymer Using Multi - scale Finite Element Modeling." Computational Materials Science 63, no. 63 (2012): ) Fereydon, Abdolhossain, Roham Rafiee, and Reza Maleki Moghadam. "Modal analysis of carbon nanotube reinforced polymer using multi - scale finite element method." Mechanics of Composite Materials 5, no. 2 (2012): ), Mahdi Fakoor, and Roham Rafiee. "Transition angle a novel concept for predicting the failure mode in orthotropic materials." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 1, no. 2 (2012): ) Fakoorsaghieh, Mehdi, and Roham Rafiee. "Transition Angle a Novel Concept for Predicting the Failure Mode in Orthotropic Materials." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 1, no. 1 (2012): -. 7) Rafiee, Roham. "Apparent hoop tensile strength prediction of glass fiber - reinforced polyester pipes." Journal of Composite Materials 47, no. 1 (2013): -. 8) Rafiee, Roham, Timon Rabczuk, Reza Pourazizi, Junhua Zhao, and Yancheng Zhang. "Challenges of the Modeling Methods for Investigating the Interaction between the CNT and the Surrounding Polymer." Advances in Materials Science and Engineering 2013, no (2013): ) Rafiee, Roham. "Experimental and theoretical investigations on the failure of filament wound GRP pipes." COMPOSITES PART B-ENGINEERING 45, no. 1 (2013): ) Rafiee, Roham. "Influence of carbon nanotube waviness on the stiffness reduction of CNT/polymer composites." Composite Structures 97, no. --- (2013): ) Rafiee, Roham, and. "Preface to special issue Theoretical and Experimental Characterization of Composites." International Journal of Composite Materials 3, no. 6A (2013): 0. 12) Fakoorsaghieh, Mehdi, and Roham Rafiee. "Fracture investigation of wood under mixed mode I/II loading based on the maximum shear stress criterion." STRENGTH OF MATERIALS 45, no. 3 (2013): ) Rafiee, Roham, and Mehdi Fakoorsaghieh. "Aeroelastic investigation of a composite wind turbine blade." Wind and Structures, An International Journal 17, no. 6 (2013): ) Rafiee, Roham, and Reza Maleki Moghadam. "On the modeling of carbon nanotubes: A critical review." COMPOSITES PART B-ENGINEERING 56, no. 56 (2014): ) Ghasemi, Hamid, Roham Rafiee, Xiaoying Zhuang, Jacob Muthu, and Timon Rabczuk. "Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling." Computational Materials Science 85, no. 85 (2014): ) Rafiee, Roham, and Reza Pourazizi. "Influence of CNT functionalization on the interphase region between CNT and polymer." Computational Materials Science 96, no. 96 (2014): x. ۲

3 17) Rafiee, Roham, and Ali Amini. "Modeling and experimental evaluation of functional failure pressures in glass fiber reinforced polyester pipes." Computational Materials Science 96, no. 96 (2014): x. 18) Rafiee, Roham, and Farshid Reshadi. "Simulation of functional failure in GRP mortar pipes." Composite Structures 113, no. 113 (2014): ) Rafiee, Roham, Mohammad Hossein Sabour, Alireza Nikfarjam, and Mostapha Taheri. "The Influence of CNT Contents on the Electrical and Electromagnetic Properties of CNT/Vinylester." Journal of Electronic Materials 43, no. 9 (2014): ) Rabczuk, Timon, Roham Rafiee, and Xiaoying Zhuang. "Preface to the Special issue Computational modeling of polymeric composites." Computational Materials Science 96, no. 96 (2014): ) Vu-bac, Nam, Roham Rafiee, Xiaoyang Zhuang, Tomb Lahmer, and Timon Rabczuk. "Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters." COMPOSITES PART B ENGINEERING 68, no. 68 (2014): ) Rafiee, Roham, and Vahid Firouzbakht. "Multi-scale modeling of carbon nanotube reinforced polymers using irregular tessellation technique." Mechanics of Materials 78, no. 78 (2014): ) Rafiee, Roham, Farshid Reshadi, and Saied Eidi. "Stochastic analysis of functional failure pressures in glass fiber reinforced polyester pipes." MATERIALS & DESIGN 67, no (2014): ) Rafiee, Roham, and Mohammad Mahdavi. "Molecular dynamics simulation of defected carbon nanotubes." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications x, no. 1 (2015): ) Rafiee, Roham, and Behzad Mazhari. "Modeling creep in polymeric composites: Developing a general integrated procedure." International Journal of Mechanical Sciences 99, no. 99 (2015): ) Rafiee, Roham, and Behzad Mazhari. "Simulation of the long-term hydrostatic tests on Glass Fiber Reinforced Plastic pipes." Composite Structures 136, no. 136 (2015): ) Rafiee, Roham, Mehdi Fakoorsaghieh, and Hadi Hesamsadat. "The influence of production inconsistencies on the functional failure of GRP pipes." Steel and Composite Structures 19, no. 6 (2015): ) Rafiee, Roham, and Mohammad Mahdavi. "Characterizing nanotube polymer interaction using molecular dynamics simulation." Computational Materials Science 112, no. xx (2016): ) Rafiee, Roham, Mojtaba Tahani, and Mohsen Moradi. "Simulation of aeroelastic behavior in a composite wind turbine blade." Journal of Wind Engineering and Industrial Aerodynamics 151, no. 151 (2016): ) Rafiee, Roham. "On the mechanical performance of glass-fibre-reinforced thermosetting-resin pipes: A review." Composite Structures 143, no. x (2016): ) Jamal-omidi, Majid, Mahdi Shayanmehr, and Roham Rafiee. "A Study on Equivalent Spherical Structure of Buckyball-C 60 Based on Continuum Shell Model." LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES 13, no. 5 (2016): ) Jamal-omidi, Majid, Mahdi Shayanmehr, and Roham Rafiee. "A study on equivalent spherical structure of buckyball-c60 based on continuum shell model." LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES 2016, no. 13 (2016): ) Jamal-omidi, Majid, Mahdi Shayanmehr, Saeed Shokrollahi, and Roham Rafiee. "A study on nonlinear vibration behavior of CNT-based representative volume element." Aerospace Science and Technology 55, no. 55 (2016): ) Rafiee, Roham, and Behzad Mazhari. "Evaluating long-term performance of Glass Fiber Reinforced Plastic pipes subjected to internal pressure." CONSTRUCTION AND BUILDING MATERIALS 122, no. 122 (2016): ) Rafiee, Roham, Mohsen Moradi, and Motahareh Khanpour. "The influence of material properties on the aeroelastic behavior of a composite wind turbine blade." journal of renewable and sustainable energy 08, no. 08 (2016): ) Rafiee, Roham, and Amin Ghorbanhosseini. "Predicting mechanical properties of fuzzy fiber reinforced composites: radially grown carbon nanotubes on the carbon fiber." International Journal of Mechanics and Materials in Design 12, no. 4 (2016): ) Rafiee, Roham, and Ferestesh Eslami. "Theoretical modeling of fatigue phenomenon in composite pipes." Composite Structures 161, no. 161 (2017): ۳

4 38) Rafiee, Roham, and Amin Ghorbanhosseini. "Stochastic multi-scale modeling of randomly grown CNTs on carbon fiber." Mechanics of Materials 106, no. 106 (2017): ) Rafiee, Roham, and Amin Ghorbanhosseini. "Investigating interaction between CNT and polymer using cohesive zone model." Polymer Composites xx, no. xx (2017): xx. 40) Rafiee, Roham. "Stochastic fatigue analysis of glass fiber reinforced polymer pipes." Composite Structures 167, no. 167 (2017): ) Rafiee, Roham, and Amirali Eskandriyun. "Comparative study on predicting Young's modulus of graphene sheets using nano-scale continuum mechanics approach." PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES 90, no. 90 (2017): ) Rafiee, Roham, and Mohammad Ali Torabi. "Stochastic Prediction of Burst Pressure in Composite Pressure Vessels." Composite Structures 185, no. 185 (2017): ) Rafiee, Roham, and Reza Shahzadi. "Mechanical Properties of Nanoclay and Nanoclay Reinforced Polymers: A Review." Polymer Composites x, no. x (2018): x. 44) Rafiee, Roham, Mohammadali Torabi, and Sattar Maleki. "Investigating structural failure of a filament-wound composite tube subjected to internal pressure: Experimental and theoretical evaluation." Polymer Testing xx, no. xx (2018): xx. 45) Rafiee, Roham, and Mohammad Reza Habibagahi. "On The Stiffness Prediction of GFRP Pipes Subjected to Transverse Loading." KSCE JOURNAL OF CIVIL ENGINEERING x, no. x (2018): x. 46) Maleki, Sattar, Roham Rafiee, Abolfazl Hasannia, and Mohammad Reza Habibagahi. "Investigating the Influence of Delamination on the Stiffness of Composite Pipes Under Compressive Transverse Loading Using Cohesive Zone Method." Frontiers of Structural and Civil Engineering xx, no. xx (2018): xx. 47) Rafiee, Roham, and Mohammad Reza Habibagahi. "Evaluating mechanical performance of GFRP pipes subjected to transverse loading." Thin-Walled Structures 131, no. x (2018): ) Rafiee, Roham, and Reza Shahzadi. "Predicting mechanical properties of nanoclay/polymer composites using stochastic approach." COMPOSITES PART B-ENGINEERING 152, no. 152 (2018): ) Rahnama, Saeid, Roham Rafiee, and Mehdi Maleki. "The influence of hygrothermal environments on the stress concentration in unidirectional composite lamina." Mechanics of Materials 129, no. 129 (2019): ) Zahedi, Meghdad, Reza Maleki Moghadam, Roham Rafiee, and Ugo Icardi. "A Study on Fracture Behavior of Semi-Elliptical 3D Crack in Clay-Polymer Nanocomposites Considering Interfacial Debonding." Engineering Fracture Mechanics 209, no. Nothing (2019): مقالات چاپ شده در نشريات داخلى 1) Rafiee, Roham, and Vahid Firouzbakht. "Predicting Young s Modulus of Aggregated Carbon Nanotube Reinforced Polymer." Mechanics of Advanced Composite Structures 1, no. 1 (2014): ) Nikfarjam, Alireza, Roham Rafiee, and Mostapha Taheri. "Electrical and electromagnetic properties of isolated carbon nanotubes and carbon nanotube-based composites." Polyolefins Journal 1, no. 4 (2017): ) رفيعى رهام. "تحليل ارتعاشات غيرخطى نانولوله کربنى با استفاده از تي ورى اغتشاشات." مهندسى مکانيک مدرس (1390): ) رفيعى رهام و رضا پورعزيزى. "بررسى تاثير ا سيب ساختارى بر روى خواص مکانيکى نانولوله کربن." مهندسى مکانيک مدرس (1392): ) نيک فرجام عليرضا رهام رفيعى محمدحسين صبور و مصطفى طاهرى. "مشخصه سازى خواص الکتريکى و الکترومغناطيسى کامپوزيت حاوى نانولوله هاى کربنى." مهندسى مکانيک مدرس (1392): ) Rafiee, Roham, and Meghdad Heydarhaei. "Youngs Modulus Prediction of Carbon Nanotubes Using Full Nonlinear Interatomic Potentials." 16th International Conference on Composite Structures (ICCS16, Porto. همايشهاى بين المللى 2) Shokrieh, Mahmood M., and Roham Rafiee. "Development of a stochastic simulation to predict elastic properties of carbon nanotube reinforced composites." International Conference on Composite Structure (ICCS16, Porto. ۴

5 3) Rafiee, Roham. "Progressive failure analysis of GRP pipes: Modeling and experimental evaluation." The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012, Tehran. 4) Rafiee, Roham. "ON THE REINFORCEMENT EFFICIENCY OF WAVY CARBON NANOTUBES." Mechanics of Nano Micro and Macro Composite Structures, Torino. 5) Rafiee, Roham, and Seyed Meghdad Heydarhaie. "INVESTIGATION OF STRAIN ENERGY RELEASE RATE IN CARBON NANOTUBE-BASED COMPOSIETS." Mechanics of Nano Micro and Macro Composite Structures, Torino. 6) Rafiee, Roham, and Reza Maleki Moghadam. "MULTI-SCALE MODELING OF IMPACT BEHAVIOR OF CARBON NANOTUBE REINFORCED POLYMER." 20th Annual International Conference on Composites or Nano Engineering (ICCE-20, Beijing. 7) Rafiee, Roham, and Reza Maleki Moghadam. "NUMERICAL MODAL ANALYSIS OF AN EMBEDDED CARBON NANOTUBE IN A POLYMER MATRIX." 20th Annual International Conference on Composites or Nano Engineering, Beijing. 8) Rafiee, Roham. "Failure analysis of GRP pipes under internal pressure." CCFA-3, Tehran. 9) Rafiee, Roham, Mohammad Hossein Sabour, Alireza Nikfarjam, and Mostafa Taheri. "Evaluation of the electrical and electromagnetic properties of CNT-based composites." ICCS17, Porto. 10) Rafiee, Roham. "Hoop tensile strength prediction of filament wound mortar pipes." ICCS17, Porto. 11) Rafiee, Roham, and Reza Pourazizi. "On the mechanical properties of defected graphene sheets and CNTs." ICCS17, Porto. 12) Rafiee, Roham, and Hadi Hesamsadat. "Stochastic determination of functional failure pressures in FRP pipes." The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), Tehran. 13) Rafiee, Roham, Farshid Reshadi, and Ali Amini. "Predicting functional failure pressures in filament wound GRP mortar pipes." The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), Tehran. 14) Rafiee, Roham, and Vahid Firouzbakht. "On the meso-scale modeling of carbon nanotube reinforced polymer." The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), Tehran. 15) Rafiee, Roham, and Hadi Hesamsadat. "Investigation of Functional Failure of Composite Pipes." first international conference on mechanics of composites, New York. 16) Rafiee, Roham, and Vahid Firouzbakht. "A novel formulation for predicting mechanical properties of CNT-based composites." first international conference on mechanics of composites, New York. 17) Rafiee, Roham, and Behzad Mazhari. "Simulation of long-term behavior in composite pipes." The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4),. 18) Rafiee, Roham. "Investigating inconsistencies of discontinuous filament winding process on functional failure pressures of GRP pipes." 1st international conferene on Composite Pipes, Tanks and Vessels (CPVT), Tehran. 19) Rafiee, Roham, and Behzad Mazhari. "A Method for Predicting Long Term Creep and Creep Failure in GRP Pipes." 1st International Conference on Composite Pipes, Vessels & Tanks (CPVT), Tehran. 20) Rafiee, Roham, and Hadi Hesamsadat. "Predicting functional failure pressures in GRP and GRP Mortar pipes." 1st international conferene on Composite Pipes, Tanks and Vessels (CPVT), Tehran. 21) Rafiee, Roham, and Behzad Mazhari. "On The Long-term Behavior of Glass Fiber Reinforced Polyester Pipes." 18th International Conference on Composite Structures, Lisbon. 22) Rafiee, Roham, and Mohsen Moradi. "Aeroelastic Instability Analysis of a Composite Wind Turbine Blade." 18th International Conference on Composite Structures (ICCS18), Lisbon. 23) Rafiee, Roham, and Amin Ghorbanhosseini. "Predicting Mechanical Properties of Fuzzy Fiber." 18th International Conference on Composite Structures (ICCS18), Lisbon. 24) Rafiee, Roham, and Amin Ghorbanhosseini. "Hierarchichal multi-scale modeling of CNT-coated fiber-reinforced laminates." 40th Solid Mechanics Conference (SolMech2016), Warsaw. ۵

6 25) Rafiee, Roham, and Motahhare Khanpour. "ANALYZING STRUCTURAL BAHAVIOR OF A COMPOSITE WIND TURBINE BLADE USING SIMPLIMED MODELING." 40th Solid Mechanics Conference (SolMech2016), Warsaw. 26) Rafiee, Roham, and Amirali Eskandariyun. "Modeling graphene sheets using nano-scale continuum mechanics approach." 19th International Conference on Composite Structures (ICCS19), Lisbon. 27) Rafiee, Roham, and Fereshteh Eslami. "Fatigue analysis of composite pipes using progressive damage modeling." 19th International Conference on Composite Structures (ICCS19), Lisbon. 28) Rafiee, Roham, and Amin Ghorbanhosseini. "On the mechanical properties of CNT grown fibers." 5th International Conference on Nanomaterials, Nanostructures and Nanoegnineering (ICNNN2016), Singapore. 29) Rafiee, Roham, and Amirali Eskandariyun. "The Influence of Vacancy Defects on The Young s Modulus of Graphene Sheets." The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), Tehran. 30) Rafiee, Roham, and Amirali Eskandriyun. "Predicting mechanical properties of graphene sheets." Advanced Computational Engineering and Experimenting (ACEX2017), Vienna. 31) Rafiee, Roham. "On the strength of GRP pressure pipes with addition of sand filler." Advanced Computational Engineering and Experimenting (ACEX-2017), Vienna. 32) Rafiee, Roham, and Amin Ghorbanhosseini. "Stochastic determination of cnt coated fibers properties." Advanced Computational Engineering and Experimenting (ACEX2017), Vienna. 33) Rafiee, Roham, and Behzad Mazhari. "Predicting long-term hydrostatic pressure of GRP mortar pipes." 20th International Conference on Composite Structures (ICCS20), paris. 34) Rafiee, Roham, Amin Ghorbanhosseini, and Mohammad Mahdavi. "Comparing different approaches to simulate CNT and polymer interaction." 20th International Conference on Composite Structures (ICCS20), paris. 35) Rafiee, Roham, and Mohammad Reza Habibagahi. "Mechanical performance of composite pipes under compressive transverse loading: Analytical and numerical approaches." International Conference on Mechanics of Advanced Materials and Equipment, Ahwaz. 36) Rafiee, Roham, and Mohammadali Torabi. "Prediction of burst pressure in composite pressure vessels." 12th International conference in Advanced Computational Engineering and Experimenting, Amsterdam. 37) Rafiee, Roham. "Simulation of Split-disk Experiment for Determining Hoop Tensile Strength of FRP Pipes." 12th International Conference on Advanced Computational Engineering and Experimenting, Amsterdam. 38) Rafiee, Roham, and Reza Shahzadi. "Estimating Young's modulus of Nanoclay Reinforced Polymers Using Stochastic Approach." 12th international conference on Advanced Computational Engineering & Experimenting, Amsterdam. همايشهاى داخلى 39) رفيعى رهام و وحيد فيروزبخت. "پيش بينى خواص مکانيکى نانوکامپوزيت حاوى نانولوله کربن با استفاده از روش موزاييک بندى نامنظم." بيست و چهارمين همايش سالانه بين المللى مهندسى مکانيک ايران يزد. 1) رفيعى رهام سيدمقداد حيدرهاي ى و عبدالحسين فريدون. "بررسى اثر قطر و کايراليتى روى مدول يانگ نانولوله کربنى توسط مدل غير خطى المان محدود." نوزدهمين همايش سالانه مهندسى مکانيک ايران بيرجند. 2) رفيعى رهام. "استخراج ضخامت بهينه لايه کامپوزيت براى ترميم لول ههاى فولادى خورده شده زيرزمينى انتقال گاز." سومين کنفرانس لوله و خطوط انتقال نفت و گاز تهران. 3) رفيعى رهام و رضا مالکى مقدم. "تحليل ارتعاشى نانوکامپوزيت حاوى نانولوله کربنى با مدل المان محدود چندمقياسى." يازدهمين کنفرانس انجمن هوافضاى ايران تهران. 4) رفيعى رهام. "پيش بينى استحکام محيطى لوله پليمرى تقويت شده با الياف شيشه." چهارمين کنفرانس لوله و خطوط انتقال نفت و گاز تهران. 5) رفيعى رهام و رضا ملکى مقدم. "ا ناليز ضربه در نانوکامپوزيتهاى تقويت شده با نانولوله کربنى به روش المان محدود چند مقياسى." کنفرانس بين المللى مهندسى مکانيک و فناورى هاى پيشرفته اصفهان. 6) رفيعى رهام عليرضا نيک فرجام محمد حسين صبور و مصطفى طاهرى. "بررسى خواص الکتريکى و الکترومغناطيسى نانوکامپوزيتهاى حاوى نانولولههاى کربن با استفاده از روش پليمريزاسيون درجا." دوازدهمين کنفرانس انجمن هوافضاى ايران تهران. ۶

7 7) رفيعى رهام و سيد هادى حسام سادات. "تحليل تصادفى تخريب در مخازن کامپوزيتى تحت فشار." سيزدهمين کنفرانس انجمن هوافضاى ايران تهران. 8) رفيعى رهام و وحيد فيروزبخت. "توسعه فرمولاسيون مناسب براى پيش بينى خواص مکانيکى نانوکامپوزيت حاوى نانولوله کربنى." سيزدهمين کنفرانس انجمن هوافضاى ايران تهران. 9) رفيعى رهام و رضا پورعزيزى. "تا ثير عاملدار کردن نانولوله کربن بر روى خواص مکانيکى نانوکامپوزيتهاى حاوى نانولولهکربن." سيزدهمين کنفرانس انجمن هوافضاى ايران تهران. 10) رفيعى رهام و بهزاد مظهرى. "بررسى و مقايسه ى روش هاى پيش بينى خزش در کامپوزيت هاى پايه پليمرى." بيست و دومين همايش سالانه بين المللى مهندسى مکانيک ايران اهواز. 11) رفيعى رهام و محمد مهدوى. "تحليل تصادفى مدول يانگ نانولوله کربنى سال و معيوب به روش ديناميک مولکولى." چهاردهمين کنفرانس انجمن هوافضاى ايران. 12) رفيعى رهام پارسا شريفى و اميرعلى اسکندريون. "کاربردها و چالشهاى استفاده از نانوکامپوزيت در صنايع مختلف." کنفرانس کاربرد کامپوزيت در صنايع ايران تهران. 13) رفيعى رهام و محمدرضا حبيب ا گهى. "شبيه سازى ا زمون سفتى لوله GRPبه روش اجزاء محدود." کاربرد کامپوزيت در صنايع ايران تهران. 14) رفيعى رهام و رضا شهزادى. "فرا يند کنترل کيفى لوله هاى کامپوزيت: از مواد اوليه تا محصول نهايى." کنفرانس کاربرد کامپوزيت در صنايع ايران تهران. داورىهاى انجام شده 15) رفيعى رهام و محمدعلى ترابى. "مطالعه مقايسه اى پيش بينى تخريب اولين لايه در مخازن تحت فشار کامپوزيتى." کنفرانس کاربرد کامپوزيت در صنايع ايران تهران. 1) Chairman of Modeling & Characterization of CNT-Polymer Composites sessions (Two sessions), ICCS16 conference, Portugal, 2011/06/28 2) Chairman of Fatigue session, X-Mech2012 conference, Tehran, 2012/03/06 3) The 12th conference of Iranian Aerospace Society AERO2013, Tehran, 2012/12/27 4) The 4th International Conference on Metamaterials, Photonic Crystals and Plasmonics, META'13, UAE, 2013/05/14 5) Chairman of Modeling & Characterization of CNT-Polymer Composites session, ICCS17 conference, Portugal, 2013/06/17 6) 2nd Global Conference on Materials Science and Engineering, CMSE 2013, China, 2013/09/16 7) International Conference on Composite Materials & Renewable Energy Applications, ICCMREA 2014, Tunisia, 2013/10/05 8) The 13th conference of Iranian Aerospace Society AERO2014, Tehran, 2013/11/07 9) Chairman of three sessions of Advanced materials and composites, X-Mech2014 conference, Tehran, 2014/02/19 10) نخستين کفرانس انرژى بادى ايران تهران 1391/06/25 11) بيست و دومين کنفرانس بين المللى مهندس مکانيک اهواز 1392/11/10 12) پانزدهمين کنفرانس انجمن هوافضاى ايران دانشکده صنعت هواپيمايى کشورى 1394/12/11 13) اولين دوره جايزه زنان در علم وزارت علوم تحقيقات و فناورى 1396/05/08 14) جشنواره انتخاب و معرفى دانشجوى نمونه دانشگاه تهران دانشگاه تهران 1396/07/20 جوايز و افتخارات(در زمينههاى مختلف مانند: طرح, مقاله,...) پذيرش مسي وليت قواى سه گانه 1) پژوهشگر جوان نمونه ملى جشنواره پژوهش دانشگاه 1394/08/10 2) عضو هيات علمى برگزيده ا موزشى در چهارمين جشنواره ا موزش دانشگاه تهران ملى ساير 1396/02/12 3) طرح پژوهشى بنيادى نمونه ملى جشنواره پژوهش دانشگاه 1396/09/28 4) پايان نامه برتر به تشخيص انجمن هوافضا در گرايش فضايى مقطع کارشناسى ارشد ملى ساير 1397/03/30 ۷

8 1) سرپرست ا زمايشگاه تحقيقاتى کامپوزيت 1397/10/04 ۸